- Suzhou Yuanda Purification Equipment Factory

Several installation methods of stainless steel cl

Date of issue：2020-07-20Reading volume：139

Abstract: in order to save money, many friends prefer to learn about the stainless steel door online, buy materials, and then install them by themselves. However, the trouble comes one after another. So this article will share with you how to install the clean door after the door to hand, so that you can save the worries.

　　Many friends in order to save money, in the installation of stainless steel clean door, prefer to choose their own online understanding, purchase materials, and then directly do their own installation, but the trouble behind one after another out. So this article will share with you how to install the clean door after the door to hand, so that you can save the worries.

　　Conventional installation method: first measure whether the size of the clean door is the same as that of the installation hole. If the size of the hole is smaller than that of the steel door, the ash skin needs to be removed. Place the steel door according to the position of the hole, and then drill holes in the four mounting holes of the door frame with the M12 drill bit, and fix them with the bolts of M12 before adjustment. Adjustment method: take the external surface of stainless steel clean door leaf as the reference plane, and check whether the door frame is parallel to the door leaf after installation. If the door frame is not parallel to the door leaf, add wood pad near the screw position on the back of the door frame until the door leaf is parallel.

Last： Five common sense of automatic cleaning door

Next： Brief introduction of steel clean door